Cosen AH-250H Specifications
| Item | Specifications | |
|---|---|---|
| Max. Capacity | Round | 250 mm (10") |
| Square | 250 mm (10") | |
| Rectangular(H x W) | 280 x 250 mm (11" x 10") | |
| Saw Blade | Speed | 15-100 m/min (49.5-330 fpm) |
| Size (WxTxL) | 3505L x 34W x 1.1Tmm (138" x 1.33" x 0.042") |
|
| Tension | Hydraulic | |
| Motor Output | Saw Blade | 3 HP (2.2 KW) |
| Hydraulic | 1 HP (0.75 KW) | |
| Coolant Pump | 1/8 HP (0.1 KW) | |
| Tank Capacity | Hydraulic | 40 L (10.6 gal.) |
| Coolant | 64 L (16.8 gal.) | |
| Vise Control | Stationary & Movalbe Hydraulic Vise | |
| Feeding | Mode | Hydraulic Automatic |
| Length | One Stroke 403mm, Max. 3627mm (142") (0-9 times) |
|
| Work Bed Height | 660 mm (26") | |
| Gross Weight | 1300 kgs (2860 lbs) | |
| Floor Space(LxWxH) | 2090 x 1850 x 1700 mm (82.3" x 72.8" x 66.9") |
|
Cosen AH-250H Automatic Bandsaw
Most suitable for mass production, Cosen's automatic band saws faciliate heavy duty and high accuracy cutting jobs in a wide range of materials. After loading work pieces and setting the required cut-off length and volumn, the machine will automatically handle all subsequent operations.
AH-250H Machine Features
- Structure
- Oversized hydraulic cylinder
- Back-tilt angle for longer blade life
- Hydraulic shuttle vise assembly
- Blade Drive
- Specially designed gearbox for high lateral pressure
- Infinitely variable blade speed
- Blade Guidance & Lubrication System
- Carbide blade guides with roller bearing guides
- Two additional guides to support the blade
- Rigid guide arm mounted on extra wide dovetail
- Automatic hydraulic blade tensioning device
- Integral coolant system
- Synchronized power driven blade brush
- Control & Automation
- Front mounted digital length counter
- LED digital blade speed monitor
- Precision feed pressure & feed rate dual valve system
- PLC control
- Bundle/single cutting mode switch
- Automatic work height selector & air gap eliminator
- Preset piece counter with automatic power off
- Material Feeding & Clamping
- Split vise jaws featuring automatic feeding down to remnant length of 50mm (2")
- Hydraulic front and rear vises
- Ductile cast iron vises with replaceable hardened wear plates
- PLC controlled multiple indexing
- One set of vertical alignment rollers
- Multiple horizontal rollers to facilitate smooth material feeding
- Discharge table with built-in coolant return
- Safety
- Proximity switch for sensing blade slippage or breakage
- Interlock design in electrical and hydraulic system
- Conduits protection measure
- "Alert Orange" safety measure
- Standard Accessories
- Blade "clip" device for easy blade change
- Adjustable material stop
- Additional flushing hose
- Bi-metal saw blade
- Built in work light
- Tool box, leveling pads, and an additional wire brush
- Operation & parts manual
- To Inquire about this product, call Glenn: 215-672-8112 or click here to inquire via email.